The machine is designed for processing holes at various angles in small, medium, and large parts.
The machine can perform drilling, countersinking, reaming, threading in steel, cast iron, and other metals and alloys, except for those alloys, the processing of which can lead to a fire hazard.
| Denomination | Data |
| Largest drilling diameter in steel to 45 GOST1050, mm | 32 |
| Largest diameter of the cut thread (Steel 45) | М16 |
| Spindle overhang (distance from the spindle axis to the generating column, measured in a plane parallel to the arm guides and passing through the column axis), mm | |
| most, no less | 800 |
| least, no more | 300 |
| Drilling radius (distance from the spindle axis to the column axis), mm: | |
| most, no less | 900 |
| least, no more | 430 |
| Distance from the lower end of the spindle to the base mirror, mm: | |
| most, no less | 960 |
| least, no more (lower than plate mirror) | -220 |
| Distance from the axis of the spindle in its horizontal position to the floor, mm: | |
| most, no less | 1470 |
| least, no more | 550 |
| Number of spindle speed steps | 12 |
| Spindle speed steps, rpm | 45, 63, 90, 125, 180, 250, 355, 500, 710, 1000, 1400, 2000 |
| Number of spindle feed steps | 4 |
| Spindle mechanical feed, mm/rev | 0,056; 0,1; 0,18; 0,32 |
| Maximum torque on the spindle, Nm | 120 |
| Maximum feed force, kN | 7 |
| Main drive power, kW | 1,5 |
| Overall machine dimensions, mm | |
| length | 1480 |
| (with coolant supply) | 1720 |
| width | 940 |
| height | 1990 |
| Weight of the machine without attachments, supplied for a fee, kg, no more | 1100 |
| Column | |
| Column diameter, mm | 180 |
| Arm | |
| Most vertical movement of the arm along the column, mm | 930 |
| Total rotation angle of the arm around the axis of the column (vertical axis) | 360° |
| Total rotation angle of the arm around the horizontal axis | 360° |
| Clamp on column | manual |
| Drill head | |
| Most stroke on the arm guides, mm | 500 |
| Total rotation angle of the drilling head around the horizontal axis | 360° |
| Head clamp on arm guides | manual |
| Spindle | |
| Spindle stroke, mm | |
| maximum | 250 |
| per turn of handwheel | 100, 48 |
| per limb division | 1 |
| for tool knockout, no more | 15 |
| Internal spindle taper | Morse 4 АТ6 |
| GOST 25557 | |
| Foundation plate | |
| Working surface size, mm: | |
| width | 630±5 |
| length (to column flange) | 800 |
| height | 180±3 |
| Number of grooves | 3 |
| Groove width according to GOST 1574, mm | 18 |
| Distance between grooves, mm | 160 |
| Mounting dimensions of the foundation plate, mm | 548х1148 |
| Detachable rectangular table | |
| Working surface size, mm: | |
| horizontal | 360х500 |
| vertical | 400х500 |
| Groove width, mm | 14Н12 |
| Distance between grooves, mm | 100 |
| Number of grooves on the surface | |
| horizontal | 3 |
| vertical | 3 |
| Designation | Denomination | Number | Note |
| 007.0000.000 | Complete machine | 1 | Model |
| 2К522-03 | |||
| Tools and accessories (included in the kit and cost of the machine) | |||
| 2К52-1.90.00000 | Rotary arm handle | 1 | |
| 2К52-1.89.10.000 | Electric box wrench | 1 | |
| 007.2000.001 | Drain plug wrench | 1 | |
| Wrench 7811-0024 GOST 2839 | 1 | ||
| Wedge 7851-0012 GOST 3025 | 1 | ||
| Sleeves GOST 13598 | |||
| 6100-0142 | 1 | 3/1 | |
| 008.1200.000 | 6100-0144 | 1 | 4/2 |
| 6100-0145 | 1 | 4/3 | |
| Cooling system | 1 | Goes only with machines of execution 03, 04, 05, 06 | |
| Documents (included in the kit and the cost of the machine) | |||
| 007.0000.000РЭ | Manual | 1* | |
| A set of documents for purchased equipment (supplier's documentation) | 1 | ||
| Accessories (supplied upon request of the customer for a fee) | |||
| 2К52-1.0000.011 | Removable box table with a set of fasteners | 1 | |
| Vise 7200-0215-02 GOST 16518 with a set of fasteners | 1 | ||
| Drill chuck 6150-4029-03 TU RB 00223728.021 | 1 | ||
| 045.0730.000 | Thread-cutting chuck with set of safety sockets М5…М12 | 1 | |
| * When delivered for export in the quantity and in the language according to the order - along with. Two copies in Russian | |||
| in the absence of special requirements. | |||
| Possible to replace the included accessories with accessories with the same technical data. | |||
RU
EN
BY