Radial-drilling machine 2К550V

The machine is intended for wide application in the industry.

Thanks to its versatility, the machine is perfect for use wherever hole making is required including the repair shop or high-volume production.

The machine can perform drilling, countersinking, reaming, threading in steel, cast iron, and other metals and alloys, except for those alloys, the processing of which can lead to a fire hazard.

Fixtures and special tools usage increase the productivity of machines significantly and expand the range of possible operations, making it possible to turn internal grooves, cut round plates from steel sheets, etc.

The machine must be installed indoors.

Nominal values of ambient air temperature during machine operation +1°С…35°С.

Relative air humidity should be no more than 80% at a temperature of + 25°C.

The accuracy class of the machine - N (normal) according to GOST 8.

The machine is not intended for installation and operation in explosive and fire hazardous areas according to the PUE (wiring regulation standard).

Denomination	Data
Largest apparent drilling diameter, mm
in steel 45 GOST 1050 , HW 207 - 229	55
in cast iron GI 20 GOST 1412	65
Largest diameter of the cut thread in steel 45 GOST 1050	М48
Largest diameter of the cut thread in cast iron GI 20 GOST 1412	М52
Hole accuracy after reaming	Н9
Roughness of machined surfaces, after reaming, no more	Ra 3,2
Threading accuracy	7Н in GOST 16093
Spindle overhang (distance from the spindle axis to the generating column, measured in a plane parallel to the arm guides and passing through the column axis), mm
most, no less	1600
least, no more	370
Drilling radius (distance from the spindle axis to the column axis), mm:
most, no less	1757
least, no more	525
Distance from the lower end of the spindle to the working surface of the plate; mm:
most, no less	1600
least, no more	580
Most vertical movement of the arm along the column, mm, no less	720
Most movement of the drilling head along the arm, mm	1230
Spindle stroke, mm
most	300
per turn of handwheel	122,46
Number of spindle speed steps	12
Spindle speed limits, rpm	40, 56, 80, 112, 160, 224, 315, 450, 630, 900, 1250, 1730
Number of working feed steps	9
Spindle feed limits, mm/rev	0,06; 0,09; 0,135; 0,2; 0,3; 0,45; 0,7; 1; 1,5
Maximum torque on the spindle, Nm	710
Maximum feed force, N	20000
Spindle end designation according to GOST 24644	Morse 5 АТ6
Working surface dimension of the plate, mm
length (to column flange)	1670
width	900
Number of T-grooves on the plate	3
Dimensions of T-grooves according to GOST 1574, mm
width	22
distance between grooves	160
Feed cut-off after set drilling depth reaching	manual, automatic
Turning on the spindle reverse after the specified thread depth reaching	manual, automatic
Arm clamp on column	automatic
Overall dimensions, mm
length	2540
width	900
height	2720
Machine weight without removable devices, kg	3500
Type of supply current	three-phase, alternating
Voltage, V	380±38
Current frequency, Hz	50±1
Electric motor rated power of the main movement drive, kW	4
Rotation frequency, rpm	1500 synchronous
Rated power of the hub lift motor, kW	1,5
Rotation frequency, rpm	1500 synchronous
Rated power of the electric motor for clamping the column in the base, kW	1,5
Rotation frequency, rpm	1500 synchronous
Coolant motor rated power	0,18
Rotation frequency, rpm	3000
Productivity of the coolant supply system, l/min, no less	3
Total motor power, kW	7,18

Designation	Denomination	Number	Note
055.0000.000-03	Complete machine	1	Model 2К550V
Included in the kit and the cost of the machine
Tools and accessories
2К52-1.89.10.000	Electric box wrench	1
007.2000.001	Drain plug wrench	1
	Sleeves GOST 13598:
	6100-0142	1	КМ 3/1
	6100-0144	1	КМ 4/2
	6100-0146	1	КМ 5/3
	6100-0147	1	КМ 5/4
	Wedges:
	7851-0012	1
	7851-0013	1
	7851-0014	1
Documents
055.0000.000 -03РЭ	Manual	1*
	A set of documents for purchased equipment (supplier's documentation)
Supplied upon request of the customer for a fee
	Drill chuck 6150-4029-03	1
045.0730.000	Thread-cutting chuck with set of safety sockets М5…М12	1
	Vise 7200-0220-02 or GM-7220P	1
055.0000.010	Box-type table	1
* When delivered for export in the quantity and in the language according to the order - along with. Two copies in Russian in the absence of special requirements.
Possible to replace the included accessories with accessories with the same technical data.

собственного производства сверлильные станки до 10.12.22

3.56 Mb

.pdf

экспертизы происхождения товара сверлильные станки до 06.07.2022