Vertical drilling machine model 2T150

The machine is designed for drilling, reaming, countersinking, and tapping in steel, cast iron, and other metals and alloys, except for those alloys, the processing of which on the machine can lead to a fire hazard.

On the machine, you can process parts on the table, the foundation plate is designed for larger ones.

Processing on the machine is carried out both with manual and mechanical spindle feed. Threading with manual and automatic spindle reversal is allowed. When threading with automatic spindle reversal, the spindle speed should not exceed 450 rpm.

Following GOST 15150, the nominal value of the ambient air temperature during machine operation is +1°С…35°С.

Relative air humidity should not exceed 80% at +25°С.

The machine is not intended for installation and operation in explosive and fire hazardous areas according to the PUE (wiring regulation standard).

Maximum permissible operating modes:

maximum torque on the spindle, Nm………………….………. 400

maximum axial cutting force, N ………………………………..……. 15000

Largest processing diameter in various materials:

holes in steel 45, mm……………50

holes in cast iron GI20, mm………………………… 60

cut thread (St 45)……………………………………..… 42

Denomination	Data
Largest apparent drilling diameter, mm
in steel 45 GOST 1050, HW 207…229	50
in cast iron GI 20 GOST 1412	60
Largest diameter of the cut thread in steel 45 GOST 1050	М42
Hole accuracy after reaming	Н9
Roughness of machined surfaces, after reaming, no more	Ra 1,6
Threading accuracy	7Н to GOST 16093
Spindle overhang (distance from the spindle axis to the generating column), mm	360±2
Distance from spindle nose to table surface, mm
most, no less	750
least, no more	210
Distance from spindle nose to the working surface of the plate (with the spindle retracted), mm, no less	1200
Spindle end designation according to GOST 24634
Spindle stroke, mm	Morse 5 АТ6
most, no less	260
per turn of handwheel	122,46
Column diameter, mm	180
Number of spindle speed steps	12
Spindle speed limits, rpm	40, 56, 80, 112, 160, 224, 315, 450, 630, 900, 1250, 1730
Number of working feed steps	9
Spindle feed limits, mm/rev	0,06; 0,09; 0,135; 0,2; 0,3; 0,45; 0,68; 1,0; 1,5
Maximum torque on the spindle, Nm	400
Maximum feed force, N	15000
Working surface dimension of the plate, mm, no less
length	615
width	630
Working surface dimensions of the table, mm, no less
length	610
width	605
Number of T-grooves, mm
on table	3
on plate	3
Width of T-grooves, mm
on table	18Н12
on plate	18Н14
Distance between T-grooves, mm
on table	100
on plate	125
Table displacement, mm, no less	540
Rotation angle of the table around the column	180°
Feed cut-off after set drilling depth reaching	automatic
Turning on the spindle reverse after the specified thread depth reaching	automatic
Overall machine dimensions, mm, no more
length	960
width	630
height	2590
Machine weight without removable devices, kg, no more	850
Type of supply current	three-phase, alternating
Voltage, V	380±38*
Phon frequency, Hz	50±1*
Electric motor rated power of the main movement drive, kW	4
Rotation frequency, rpm	1500, synchronous
Coolant motor rated power	0,18
Rotation frequency, rpm	3000, synchronous
Total power of electric motors, kW	4,18
*If other parameters are not specified

Designation	Denomination	Number	Note
150.0000.000	Complete machine	1	Model 2Т150
Tools and accessories (included in the kit and cost of the machine)
2К52-1.89.10.000	Electric box wrench	1	-
2К52-1.90.00.000	Handle	1	-
007.2000.001	Drain plug wrench	1	-
	Wedges GOST 3025
	7851-0012	1
	7851-0013	1
	7851-0014	1

	Sleeves GOST 13598
	6100-0142	1	3/1
	6100-0144	1	4/2
	6100-0146	1	5/3
	6100-0147	1	5/4
Documents (included in the kit and the cost of the machine)
150.0000.000РЭ	Manual	1*
-	A set of documents for purchased equipment (supplier's documentation)	1*	-
Accessories (supplied upon request of the customer for a fee)
	Vise 7200-0215-02** GOST 16518	1	-
	with a set of fasteners	1
	Drill chuck	1	-
	6150-4029-03 TU RB 00223728.021	1
045.0730.000	Thread-cutting chuck with set of safety sockets М5-М12	1	-
* When delivered for export in the quantity and in the language according to the order - along with. Two copies in Russian in the absence of special requirements.
**Possible to replace the included accessories with accessories with the same technical data.

собственного производства сверлильные станки до 10.12.22

3.56 Mb

.pdf

экспертизы происхождения товара сверлильные станки до 06.07.2022